6038e金沙

FR-S / BRZ / 86

Below is a list of item for the Scion FR-S, Toyota 86, and Subaru BRZ.  We are currently working on more products for this vehicle, please check back soon.  For sneak-peeks also see our and GReddy FRS / 86 / BRZ  Quick Product Referance Page

( )

* Some products listed in this page are "Race-only" parts, which are legal for sale or use in CA only on vehicles which may never be driven on a public highway.

 *WARNING: Cancer & Reproductive Harm
 





Car Make Type Size Description PART #
Scion / Subaru FR-S / BRZ / 86 2013-17

6038e金沙 GReddy Supreme SP Exhaust

10118206
Car Make: Scion / Subaru
Type: FR-S / BRZ / 86
Size: 2013-17
Notes:

Also Compatible with 2017 Toyota 86 and 2017 Subaru BRZ!

The Supreme SP for the Scion FR-S & Subaru BRZ features a large horizontally mounted, 3-section muffler with a center inlet and an unique, tuned, internal "Y-pipe." This directs exhaust gases through a center chamber to reduce overall sound and improves flow to the outer straight-through sections. These outer sections of the muffler have our updated high-temp, internal sound suppression system. The exhaust is finished-off with dual GReddy slant-cut, double-walled tips in the factory bumper outlets. This cat-back exhaust also uses a simplified exhaust pipe routing with a large straight-through resonator in the mid-pipe, to tune-out any drone. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a .

 

SOUND CLIP

NOTE:  Becuse the Supreme SP for this model uses a factory type "donut gasket" flange to the factory piping, it fits both the 2012-16 FR-S / BRZ and the 2017-on "kouki" 86 / BRZ models (the slight change in the OEM factory over-pipe does not effect fitment on the Supreme SP). 

 

Chassis:   ZN6
Engine:   4U-GSE (FA20)
Type:   Cat-back system
 (horizontally mounted muffler with dual tips)

Number of pieces:  3
Piping:   63.5 mm (2.5")
Tip(s):   2x 115mm (4.5")
Gasket(s):  2.5" oval (qty: 2 included) replacement
Resonator6038e金沙:   Yes

Notes:  reuse factory doughnut-gasket and spring bolts for mid-pipe

Weight:  34.8 lbs   (-3.3 lbs)
Sound Comparison (SAE J1169) Test6038e金沙:  L82 / R83 dB(a) @4500RPM 

Dyno Chart
HP
:  +6 hp
TRQ:  +7.5  ft-lbs

* also fits 2017 Toyota 86  Manual Trans 


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced. **Test results may vary from car to car

Part #: 10118206
Price:
895.00
IMAGES:
Scion / Subaru FR-S / BRZ 2013-16

GPP RS Race Exhaust 

10118409
Car Make: Scion / Subaru
Type: FR-S / BRZ
Size: 2013-16
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2012-16 Scion FR-S & Subaru BRZ is our most aggressive system we offer for the ZN6 chassis. The RS-Race is ideally suited for turbocharged, race applications (or customers who want an aggressive sounding exhaust), which require less sound suppression and maximum flow. This light-weight, single-sided, full stainless-steel 3.0” (76mm) cat-back RS-Race exhaust exits the (left) driver-side and has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.

Sound Clip

  * Optional Tip Silencer : 51mm / 43mm

  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accomidate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis:   ZN6
Engine:  4U-GSE (FA20)
Type6038e金沙:   Cat-back exhaust

Number of pieces:  2pcs
Piping:   76mm (3.0")
Tip:   115 mm (4.5") x L170mm (6.7")
Gasket6038e金沙(s):   3" oval (qty: TBA included) replacement

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.
 

Weight:  17.6 lbs   (Stock weight  39 lbs)
Sound level:  102 dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118409
Price:
550.00
IMAGES:
Toyota / Subaru 86 / BRZ 2017-on

GPP RS Race Exhaust  

10118410
Car Make: Toyota / Subaru
Type: 86 / BRZ
Size: 2017-on
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2017-on Subaru BRZ / Toyota 86 is an aggressive system for the minor-change ZN6 chassis. The RS-Race is ideally suited for turbocharged or race applications (or customers who want an aggressive sounding exhaust), which require less sound suppression and maximum flow. This light-weight, single-sided, full stainless-steel 3.0” (76mm) cat-back RS-Race exhaust exits the (right) passenger-side and has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.
 

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accomidate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis:   ZN6
Engine:  4U-GSE (FA20)
Type:   Cat-back exhaust

Number of pieces:  2pcs
Piping:   76mm (3.0")
Tip:   115 mm (4.5") x L185 (7.2)
Gasket(s):   3" oval (qty: TBA included) replacement

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.
 

Weight:  TBA lbs   (Stock weight  39 lbs)
Sound level:  TBA dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118410
Price:
550.00
IMAGES:
Scion / Subaru FR-S / BRZ 2013-16

GReddy EVOlution GT Exhaust

10118300
Car Make: Scion / Subaru
Type: FR-S / BRZ
Size: 2013-16
Notes:

 

The EVOlution GT6038e金沙 for the Scion FR-S & Subaru BRZ features dual angled Evo mufflers for a stylish and aggressive layout. Large 76mm (3”) piping is carefully routed through a large resonator in the mid-pipe and round the rear differential to a centralized Y-section for more even flow. This creates and improved performance and sound for both turbocharged and normally aspirated applications. The system is finished off with high polished piping and our classic Evo 115mm laser engraved GReddy tip. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis: ZN6
Engine: 4U-GSE (FA20)
Type: Cat-back system
6038e金沙 (dual angled mufflers, with extended tips)

Notes:  * not compatiable with 2017 models - 2017 models use p/n 10118301

Number of pieces: 3
Piping: 76 mm (3.0") - dual 76mm (3.0")
Tip(s): 2x 115mm (4.5")
Gasket(s): 3.0"/ oval (qty: 2 included) replacement (1x spl. composite gasket )
Resonator: Yes

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight: TBA lbs 
Sound level: L94 / R93 dB(a) @4500RPM

Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs

*Also see our GReddy Air Intake System for the FR-S / BRZ*

*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10118300
Price:
950.00
IMAGES:
Toyota / Subaru 86 /BRZ 2017-on

GReddy EVOlution GT Exhaust

10118301
Car Make: Toyota / Subaru
Type: 86 /BRZ
Size: 2017-on
Notes:

Specifically for the late-model 2017-on Toyota 86 / Subaru BRZ (updated mid-pipe)

The EVOlution GT6038e金沙 for the Scion FR-S & Subaru BRZ features dual angled Evo mufflers for a stylish and aggressive layout. Large 76mm (3”) piping is carefully routed through a large resonator in the mid-pipe and round the rear differential to a centralized Y-section for more even flow. This creates and improved performance and sound for both turbocharged and normally aspirated applications. The system is finished off with high polished piping and our classic Evo 115mm laser engraved GReddy tip. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis: ZN6
Engine: 4U-GSE (FA20)
Type: Cat-back system
(dual angled mufflers, with extended tips)

Number of pieces: 3
Piping: 76 mm (3.0") - dual 76mm (3.0")
Tip(s): 2x 115mm (4.5")
Gasket(s): 3.0" oval (qty: 2 included) replacement (1x spl. composite gasket)
Resonator: Yes

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight: TBA lbs 
Sound level: L94 / R93 dB(a) @4500RPM

Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs

*Also see our GReddy Air Intake System for the FR-S / BRZ*

*Data collected on stock vehicle *Retains catalytic convertor, front pipe
6038e金沙 *TBA = To Be Announced

Part #: 10118301
Price:
950.00
IMAGES:
Scion / Subaru FR-S / BRZ 2013-16

GReddy Revolution RS Exhaust

10118102
Car Make: Scion / Subaru
Type: FR-S / BRZ
Size: 2013-16
Notes:

The Scion FR-S & Subaru BRZ for the Revolution RS offers aggressive looks, yet has controlled deep exhaust tone. It features full 3” diameter piping for superior performance. The purposeful single-sided cat-back layout exits the left side of the vehicle and produces an effective but light-weight system. The extra large GReddy resonator controls unwanted drone.  Like all GReddy Revolution RS systems the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a .

 

SOUND CLIP

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis:   ZN6
Engine:   4U-GSE (FA20)
Type:   Cat-back system
6038e金沙 ( large diameter single muffler system)

Note: * not compatiable with 2017 models

Number of pieces:  2pcs
Piping:   76 mm (3.0")
Tip:    115mm (4.5") x L 150 (5.9")
Gasket(s):    3.0" oval (qty: 1 included) replacement
Resonator:   yes

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight:  21.5 lbs   (Stock weight  39 lbs)
Sound level:  107* dB(a) 

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118102
Price:
650.00
IMAGES:
Toyota / Subaru 86 / BRZ 2017-on

6038e金沙 GReddy Revolution RS Exhaust

10118107
Car Make: Toyota / Subaru
Type: 86 / BRZ
Size: 2017-on
Notes:

6038e金沙 An aggressive but controlled exhaust system for the Scion FR-S & Subaru BRZ is the Revolution RS. It features full 3” diameter piping for superior performance. Perfect for vehicles with forced-induction, like turbos, but it also includes a large mid-pipe resonator to help remove unwanted drone from the passanger compartment. The purposeful single-sided cat-back layout exits the right side of the vehicle and produces an effective but light-weight system. Like all GReddy Revolution RS systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

6038e金沙 also 2017-on Subaru BRZ

 

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis:  ZN6 Kouki (minor change)
Engine:  FA20
Type6038e金沙:   Cat-back system

Number of pieces
Piping:    76 mm ( 3.0 in.)
Tip:   115 mm (4.5 ") x L185mm  (7.2")
Gasket(s):    3.0 " oval (qty: 1 included) replacement
Resonator:   Yes
Optional Silencer Available: yes

6038e金沙 Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight:  23.1 lbs   (Stock weight  37.6 lbs)
Sound level:  102 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118107
Price:
650.00
IMAGES:
Scion / Subaru FR-S / BRZ 2013-16

6038e金沙 CS GTS Ver.2 (JDM spec)

10110732
Car Make: Scion / Subaru
Type: FR-S / BRZ
Size: 2013-16
Notes:

JDM - Edition TRUST Comfort Sports GTS Ver.2 exhaust.

Chassis: ZN6

Engine: 4U-GSE

6038e金沙 Single to dual piping and dual muffler section cat-back exhaust

Number of Pieces:  2

Piping:  60mm (2.36in) to dual 50mm (2")

Tip: 115mm (4.5in.)  Double Wall Stainless Steel

         with burnt Ti colored finish

Resonator:  Yes

Silencer: No

Weight: 30.8 lbs

Sound level: 94-93 dBA

 Also see:

Part #: 10110732
Price: 1550.00
IMAGES:
VIDEO:
view video
Scion / Subaru FR-S / BRZ 2013-16

6038e金沙 CS GTS Ver.3 (JDM quad tip) 

10110733
Car Make: Scion / Subaru
Type: FR-S / BRZ
Size: 2013-16
Notes:

JDM - Limited Edition TRUST Comfort Sports GTS Ver.3 exhaust.

  * compatiable with JDM TRD bumper only

Chassis: ZN6

Engine: 4U-GSE

6038e金沙 Single to dual piping and dual muffler section cat-back exhaust

Number of Pieces:  3

Piping:  60mm (2.36in) to dual 60mm (2.36")

Tip:6038e金沙 Quad Double Wall Stainless Steel

         with burnt Ti colored finish

Resonator:  Yes

Silencer: No

Sound level: 93-94 dBA

Part #: 10110733
Price: 1950.00
IMAGES:
Scion FR-S 2013-16

Super Street Titan Ti Exhaust

10113403
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Chassis: ZN6

Engine: 4U-GSE

Full Titanium Single to dual piping and dual muffler section cat-back exhaust
with adjustable tip lenght 

Number of Pieces:  3

Piping: Titanium 60mm to dual 50mm

Tip: Titanium 115mm (Adjustable length)

Resonator:  Yes

Silencer: No

Weight:6038e金沙 18.0 lbs

Sound level: 92/90 dBA

 Also see: Facebook - GReddy FR-S

Part #: 10113403
Price: 3900.00
IMAGES:
VIDEO:
view video
Toyota / Subaru 86 /BRZ 2017-

6038e金沙 Airnix GT - Drop in Air Filter Replacement 

12512523
Car Make: Toyota / Subaru
Type: 86 /BRZ
Size: 2017-
Notes:

High Flow - Airinx GT - TY-23  drop in replacement air filter element (for stock air box)

Fits Toyota 86 (MT) Subaru BRZ (MT) "Kouki"
 * (automatic transmission for the 2017 86/BRZ and all 2013-16 use p/n 12512516)

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

 

Part #: 12512523
Price: 65.00
IMAGES:
Scion FR-S 2013-16

Airnix GT - Drop in Air Filter Replacement

12512516
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

High Flow - Airinx GT - TY-16GT  drop in replacement air filter element (for stock air box)

Also fits Subaru BRZ (MT/AT)
 * (also fits automatic transmission for the 2017 86/BRZ)

Chassis: ZN6 / ZC6

Engine:6038e金沙 4U-GSE / FA20

Part #: 12512516
Price: 55.00
IMAGES:
Scion FR-S 2013-17

6038e金沙 Air Intake System (H) 

12511040
Car Make: Scion
Type: FR-S
Size: 2013-17
Notes:

12511040 will be superceed by 12510642 with the new Airinx M-80

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

6038e金沙 High Flow - Airinx AY-MB Air Intake Kit

Dry Element with cast Aluminum intake pipe.

 

 

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Part #: 12511040
Price: 318.00
IMAGES:
Scion FR-S 2013-16

Direct Suction Tube (C)

11910110
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

6038e金沙 Carbon suction tube for improved response and weight savings. Includes: 70mm dia. GReddy silicone hoses

6038e金沙 Compatiable with GReddy Airinix Intake KIt

 

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Part #: 11910110
Price: 530.00
IMAGES:
Scion FR-S 2017-

6038e金沙 Direct Suction Tube (C)

11910111
Car Make: Scion
Type: FR-S
Size: 2017-
Notes:

6038e金沙 Also fits Subaru 2017 M/C BRZ

Chassis: ZN6 / ZC6

Engine:6038e金沙 4U-GSE / FA20

Carbon suction tube for improved response and weight savings. Includes: 70mm dia. GReddy silicone hoses

Compatiable with GReddy Airinix Intake KIt

 

 

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Part #: 11910111
Price: 530.00
IMAGES:
Scion FR-S 2013-16

6038e金沙 Air Intake Snorkel 

12515001
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine:6038e金沙 4U-GSE / FA20

GReddy Air Intake Snorkel delivers more cool air into the factory air box, while carefully routing air from the front grill.  
The unique FRP shape promotes air flow to the filter element.  Mounting brackets and hardware included.

6038e金沙  Cool air intake tempatures provide improved performance and efficiency.

* compatiable with GReddy Circuit Spec Oil Cooler Kit.

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Part #: 12515001
Price: 240.00
IMAGES:
Scion / Toyota / Subaru FRS / 86 / BRZ ZN6

6038e金沙 GReddy TW-R Aluminum Radiator 

12013803
Car Make: Scion / Toyota / Subaru
Type: FRS / 86 / BRZ
Size: ZN6
Notes:

6038e金沙 JDM-spec. GReddy Aluminum radiator TW-R ZN6/ZC6

Product features:
By making the core thickness thicker than the normal radiator, the capacity of the cooling water is greatly secured.
Achieves improved cooling efficiency and reduced pressure loss. In addition, it is made of all-aluminum, reducing the increase in weight.
(Core thickness: 36 mm) 

* Without radiator cap


[Compatible models] JDM Toyota 86/Subaru BRZ
Vehicle type: ZN6/ZC6
E/G model: FA20
Year: 12.04 ~
Remark: MT/AT common

Part #: 12013803
Price:
650.00
IMAGES:
Scion FR-S 2013-

6038e金沙 Upper Water Temp Adapter

16401690
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

FA20 aluminum water neck, with built in bracket, water temp adaper.  Fits OEM and GReddy Type N radiator caps
(1.3K Black p/n 13911001, 1.3K Polished p/n 13911003, or 1.3K Brushed p/n 13911005.)

Allows for safe 1/8PT  water tempature sensor mounting in the upper radiator hose.
6038e金沙 Includes 8mm dia. house union for water overflow, and optional 1/8PT plug cap.

Aluminum - anodized blue, with GReddy logo.

 

 

 

GReddy FR-S Product Page

Part #: 16401690
Price: 230.00
IMAGES:
Scion FR-S 2013-

6038e金沙 Oil Pan Baffle Plate

13515901
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

6038e金沙 Engine: 4U-GSE / FA20

Aluminum baffle plate with a shark duct that balances engine oil to prevent oil pick up problems.
Smooth oil directing to oil pick up.  Increase stablity for oil pressure.
Ideal for high G-loads.  Both cornering and acel / decel situatations.

6038e金沙 compatiable for N/A or GReddy turbo applications.

6038e金沙 Aluminum - anodized blue, with GReddy logo.

 

 

 

GReddy FR-S Product Page

Part #: 13515901
Price: 150.00
IMAGES:
Scion FR-S 2013-16

10row Oil Cooler Kit 

12014634
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Circuit Spec with ducting.

also fits Subaru BRZ

NOTE* - This is a JDM Specific 86 Kit, which requires the relocation of an electric module (brackets not included) See image

 (ZN6) 4U-GSE / (ZC6) FA20

positioned in front of the radiator, front right side of the bumper

10 row, Circuit Spec. with air ducting

Built in thermostat oil block adapter (operating temperature: 75c - 82c ±2c)
6038e金沙    (also includes GReddy M18 Sensor Terminal fitting (with 3 1/8PT ports)

6038e金沙 light-weight nylon mesh hose & fittings

6038e金沙 NS1010G core (+540cc or +0.57 quarts)

requires use of QX-1,3, SX-1,3 oil filter

* JDM Peformance Info: ()


p/n  12014633     10row Oil Cooler kit without air duct      MSRP $850.00

Part #: 12014634
Price: 1050.00
IMAGES:
Toyota 86 2017-

10row Oil Cooler Kit

12014638
Car Make: Toyota
Type: 86
Size: 2017-
Notes:

Circuit Spec with ducting.

   (2017- BRZ use p/n 1204607)

NOTE* - This is a JDM Specific 86 Kit, which requires the relocation of an electric module (brackets not included) See image

 (ZN6) 4U-GSE / (ZC6) FA20

6038e金沙 positioned in front of the radiator, front right side of the bumper

10 row, Circuit Spec. with air ducting

Built in thermostat oil block adapter (operating temperature: 75c - 82c ±2c)
   (also includes GReddy M18 Sensor Terminal fitting (with 3 1/8PT ports)

6038e金沙 light-weight nylon mesh hose & fittings

NS1010G core (+540cc or +0.57 quarts)

requires use of QX-1,3, SX-1,3 oil filter

* JDM Peformance Info: ()


p/n  12014637    10row Oil Cooler kit without air duct (Kouki 86/BRZ)     MSRP $850.00

Part #: 12014638
Price: 1040.00
IMAGES:
Subaru BRZ 2017-

10row Oil Cooler Kit

12064607
Car Make: Subaru
Type: BRZ
Size: 2017-
Notes:

6038e金沙 Circuit Spec with ducting.

   (2017- 86 use p/n 1201638)

NOTE* - This is a JDM Specific 86 Kit, which requires the relocation of an electric module (brackets not included) See image

6038e金沙  (ZN6) 4U-GSE / (ZC6) FA20

6038e金沙 positioned in front of the radiator, front right side of the bumper

6038e金沙 10 row, Circuit Spec. with air ducting

Built in thermostat oil block adapter (operating temperature: 75c - 82c ±2c)
   (also includes GReddy M18 Sensor Terminal fitting (with 3 1/8PT ports)

light-weight nylon mesh hose & fittings

NS1010G core (+540cc or +0.57 quarts)

requires use of QX-1,3, SX-1,3 oil filter

* JDM Peformance Info: ()


p/n  12014637    10row Oil Cooler kit without air duct (Kouki 86/BRZ)     MSRP $850.00

Part #: 12064607
Price: 990.00
IMAGES:
Scion FR-S 2013-

6038e金沙 FR-S / BRZ / 86 Oil Block Set

12002802
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

6038e金沙 also fits Subaru BRZ

6038e金沙 M20 x P1.5 size with adapter for FA20 / 4U-GSE engines

JDM 1/8 PT (1/8 BSP) ports for sensors

Part #: 12002802
Price:
85.00
IMAGES:

Sensor Terminal M18 (for Oil Cooler Blocks)

12401178
Car Make:
Type:
Size:
Notes:

Attaches inbetween the M18 port on a GReddy Oil Cooler Block adapter and the AN fitting line.

6038e金沙 Used to easily mount standard 1/8PT tempature and pressure sensors.

6038e金沙 Includes 3x 1/8PT plugs.

(same item that is included in the FRS/BRZ Oil Cooler Kit)

Part #: 12401178
Price: 30.00
IMAGES:
Scion FR-S 2013-17

Manifold Pressure Port

11910101
Car Make: Scion
Type: FR-S
Size: 2013-17
Notes:

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

No fuss way to convenently access a vaccuum / boost source on a FR-S / 86 / BRZ's FA20 engine (also compatiable with Forrester FA20 engine)

Ideally suited for force induction applications, where there is a need to access vaccuum / boost, i.e boost controller, boost gauge, etc...

 

GReddy FR-S Product Page

Part #: 11910101
Price: 110.00
IMAGES:
Scion FR-S 2013-

GPP Individual Throttle Body Kit

11910200
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

also fits Subaru BRZ / Toyota 86
    for (ZN6) 4U-GSE / (ZC6) FA20

Compatible with Stock Air Intake, GReddy Air Intake(s) and GReddy Turbo Kit(s)
    (and force induction kits, which mount to stock location)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

6038e金沙 GReddy Performance Products Individual Throttle Body conversion kit for the FRS/86/BRZ FA20 engine is designed to improve throttle response and mid-range torque. The system utilizes the stock FA20 electronic single throttle body, through special linkages, to operate the ITBs. The bolt-on kit includes necessary hardware, brackets, vacuum canister, high quality, cast intake manifold adapters, large diameter runners and an intake manifold plenum to the stock throttle position. This makes the GPP ITB conversion compatible with the stock air intake, or any aftermarket air intake or turbo kit, which connects in the factory throttle position. The kit also includes balancing tools - Throttle Body Synchronizer and electronic A/F dongle for equalizing each cylinder.

(Installation Instructions)

See more info on our Blog 

Bolt-on Racing Individual Throttle Bodies Conversion 
   (additional fuel management not included - requires original OEM electronic throttle body and compatible fuel injectors and fuel rail)

 

includes:  High quality cast aluminum intake manifolds (L/R), Genuine Toyota-Japan AE111 20V Individual Throttle Bodies (48mm butterflies)6038e金沙, large cast runners and intake manifold plenum, necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

     also includes:6038e金沙 Balancing Tools - Throttle Body Synchronizer and electronic A/F dongle for equalizing each cylinder.

 

*Notes: Future option for open 50mm velocity stacks and ECUTEK speed density set-up (removes runners and plenum) sold separately

 

GReddy Dyno Notes

   * Increased throttle response and mid-range torque
  *(Scion FR-S with GReddy large diameter exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
  **dyno results may vary depending on conditions, additional components & tuning

 

GReddy FR-S Product Page

Part #: 11910200
Price: 2900.00
IMAGES:
Scion FR-S 2013-

GReddy Tuner Turbo Kit   T518Z

11510094
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

also fits Subaru BRZ / Toyota 86 

6038e金沙 for (ZN6) 4U-GSE / (ZC6) FA20

(Installation Instructions)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Tuner Turbo Kit ( additional fuel management not included)

GReddy T518Z -10cm2 actuator turbo (top-mounted)

4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

Large SUS downpipe & front pipe (removes catlyic-conveters)

free-flow Airinx AY-SM air intake

6038e金沙 aluminum intercooler piping (direct routing)

Type 40E6038e金沙 Intercooler with end-tanks

6038e金沙 includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

    *

GReddy Dyno results:  +93.5whp* / +68.7ft-lbs* @ 7psi
  *(2013 Scion FR-S with GReddy Evo3 exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
  **dyno results may vary depending on conditions, additional components & tuning

*** Compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S
     ( p/n 12014632 )

In many states, it is unlawful to tamper with your vehicle’s emissions equipment. GReddy / GPP (GReddy Performance Products, Inc.) products are designed and sold for sanctioned off-road/competition, non-emissions controlled vehicles only and may never be used on a public road or highway. Using GReddy/GPP products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website: for state by state details in the USA.) It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any GReddy/GPP product.
Legal for sale or use in CA only on vehicles which may never be driven on a public highway

 

GReddy FR-S Product Page

Part #: 11510094
Price: 4700.00
IMAGES:
Scion FR-S 2013-

GReddy Tuner Turbo Kit   T620Z 

11510407
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

also fits Subaru BRZ / Toyota 86 

for (ZN6) 4U-GSE / (ZC6) FA20 with low compression built motors only*
please use # T518Z or #115180006038e金沙 GTX-R for stock engine applications

(Installation Instructions)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Tuner Turbo Kit ( additional fuel management not included)

Larger GReddy T620Z -10cm2 actuator turbo (top-mounted)

4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

Large SUS downpipe & front pipe (removes catlyic-conveters)

free-flow Airinx AY-SM air intake

aluminum intercooler piping (direct routing)

Type 40E Intercooler with end-tanks

includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

    *  

GReddy Dyno Notes
  *(Scion FR-S with GReddy large diameter exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
  **dyno results may vary depending on conditions, additional components & tuning

*** Compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S
     ( p/n 12014632 )


In many states, it is unlawful to tamper with your vehicle’s emissions equipment. GReddy / GPP (GReddy Performance Products, Inc.) products are designed and sold for sanctioned off-road/competition, non-emissions controlled vehicles only and may never be used on a public road or highway. Using GReddy/GPP products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website: for state by state details in the USA.) It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any GReddy/GPP product.
Legal for sale or use in CA only on vehicles which may never be driven on a public highway.

 

GReddy FR-S Product Page

Part #: 11510407
Price: 5200.00
IMAGES:
Scion FR-S 2013-16

GPP Tuner Turbo Kit  GTX 2867R Gen II 

11518000
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

 

also fits Subaru BRZ / Toyota 86 

for (ZN6) 4U-GSE / (ZC6) FA20 (for stock and built engines)

   -- Typical low boost Dyno results: 278whp / 210ft-lbs @ 10.29psi
   -- Easily capable of boosting higher for even more power
        (additional engine modifications may be necessary)
   -- GTX2867R -Gen2 turbo is rated upto 550hp

      * NOTE:  Replacement, low profile radiator fans required for installation.
                    [2x SPAL Low Profile 9” fans SPAL Part#  
30100392*]
                    Intercooler installation will also require removing the factory crash beam.  [Race - "Street Fraction Bash Bar"]

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Includes: GARRETT GTX2867R GEN. II Turbocharger

 

GReddy Performance Products is proud to add the full line of Turbo by Garrett GTX-R turbochargers to our GReddy/Mitsubishi line-up. With more options to better match the ideal turbocharger(s) to each specific application, look for more aggressive turbo kits from the GPP Turbo Kit line.

The latest addition to our FR-S/86/BRZ Tuner Turbo Kits is our Version 3, GTX-R Tuner Turbo Kit for the 2012-2017 FR-S, 86 and BRZ. Designed around a powerful Garrett GTX-2867R Gen II (with a rated range of 275-550hp,) this updated kit features a larger, centered GReddy Type-24 intercooler and all the necessary hardware for a versatile tuner kit, that will be an ideal fit for both stock FR-S/86/BRZ engines, as well as fully strengthened FA20 engines.

(Installation Instructions)


Tuner Turbo Kit ( additional fuel management not included)

Advanced actuator turbo (top-mounted)

4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

Large SUS downpipe & front pipe (removes catlyic-conveters)

6038e金沙 free-flow GPP open element air intake

6038e金沙 aluminum intercooler piping (direct routing)

Large centered Type 246038e金沙 Intercooler with end-tanks

6038e金沙 includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

GReddy Dyno results: 278whp* / 210ft-lbs* @ 10psi
*(2016 Scion FR-S with GReddy exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
**dyno results may vary depending on conditions, additional components & tuning

*** Not compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S ( p/n 12014632 )

 

In many states, it is unlawful to tamper with your vehicle’s emissions equipment. GReddy / GPP (GReddy Performance Products, Inc.) products are designed and sold for sanctioned off-road/competition, non-emissions controlled vehicles only and may never be used on a public road or highway. Using GReddy/GPP products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website: for state by state details in the USA.) It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any GReddy/GPP product.
Legal for sale or use in CA only on vehicles which may never be driven on a public highway.

 

GReddy FR-S Product Page

Part #: 11518000
Price: 5200.00
IMAGES:
Scion Toyota Subaru FR-S / 86 / BRZ 2012-on

BOV Kit (Tuner Turbo Kit) - Type FV - NEW

11511214
Car Make: Scion Toyota Subaru
Type: FR-S / 86 / BRZ
Size: 2012-on
Notes:

GREDDY BOV FV KIT BFV-135 - (this kit will not include blue FV horn outlet)

for use with GReddy T518Z or T618Z Tuner Turbo Kit for recirculation or open to atmosphrere
( for use with GPP GTX-R Tuner Turbo for open to atmosphere only)

(replaces sucition pipe and compression pipe  to throttle body)

(ZN6) FA20

with BOV FV (Floating Valve)
with 19mm adapter & 19mm recirc. tube
reciruclates back into air intake
or open with included parts (FV horn)
 

 

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Part #: 11511214
Price: 580.00
IMAGES:
Scion / FRS / 86 FA20 FRS / BRZ / 86

Main V-Belt

13514509
Car Make: Scion / FRS / 86
Type: FA20
Size: FRS / BRZ / 86
Notes:

Subaru BRZ / Scion FRS / Toyota 86

6PK2075 - Blue

Main V-Belt

Part #: 13514509
Price: 115.00
IMAGES:
Scion FR-S 2013-

6038e金沙 Billet Pulley Kit (Full Kit)

13512111
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

[UPDATED]

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

Full 6piece Aluminum engine pulley kit Increases engine response.
includes: Alternator pulley, water pump pulley, tensioner pulley, 2x No.1 Idler pulley and 1x no.2 Idler pulley

Duralumin - anodized blue, with GReddy logo.

 

 

 

GReddy FR-S Product Page

Part #: 13512111
Price: 780.00
IMAGES:
Scion FR-S 2013-

6038e金沙 Billet Pulley Kit (Alt. / Water)

13512112
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

[UPDATED]

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

Stanard 2 piece Aluminum engine pulley kit Increases engine response. 
includes: Alternator pulley, water pump pulley

6038e金沙 Duralumin - anodized blue, with GReddy logo.

 

 

 

GReddy FR-S Product Page

Part #: 13512112
Price: 325.00
IMAGES:
Scion FR-S 2013-

6038e金沙 Engine Stroker Kit 

13511600
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

also fits Subaru BRZ / Toyota 86  for (ZN6) 4U-GSE / (ZC6) FA20

GReddy Superior Spec. 2.1L FA20 / 4U-GSE Engine Stroker Kit

 

Engine strengthening is crucial for safety and reliability of FR-S and BRZ over the 350hp mark. GReddy engineers have drawn from our FR-S race experience to assemble a complete stroker kit for the FA20/4U-GSE boxer engine, using only superior components. The kit features 9.5:1, 86mm bore. 2618 T6 forged aluminum pistons with specially designed shape ideal for high boost applications. This is connected to extra strong H-beam 433OM steel alloy forged connecting rods with a factory style 18deg. split line. And at the heart of the 2.1L kit is our dynamic balanced, E4340 Cr-Ni-Mo alloy billet steel stroker crankshaft. 

 Forged Pistons (4)
    - 9.5:1 Compression
    - 86mm bore
    - 2618 T6 high tensile forged aluminum
    - ring widths 1.0 / 1.2 / 2.8mm
    - .866 x 2.250 free floating carbon steel wrist pins

 Connecting Rods (4)
    - Strong H-Beam Design with factory style 18deg. split line
    - Forged 4330M steel Alloy
    - CNC machined, shot peened
    - Silicone bronze bushings for full floating pins
    - Top quality 3/8" bolts

 Stroker Crankshaft (1)
    - E4340 Aircraft quality Cr-Ni-Mo alloy billet steel
    - Triple heat-treated
    - Ion-plasma nitride journals
    - High speed straight line oiling system
    - Dynamic balanced

 

GReddy FR-S Product Page

Part #: 13511600
Price: CALL
IMAGES:
Scion FR-S 2013-

6038e金沙 Differential Cover

14510400
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

(ZN6) FR-S/86/BRZ  high capacity differential cover

6038e金沙 Cast Aluminum, Off-set design for improved exhaust clearance

+750cc (1900cc capacity)

SUS baffle plate, for improved oil control 

Provisions for rear differential oil cooler hook up (M18 P1.5)

6038e金沙 Port for 1/8PT temp sensor

Includes GReddy 5000G Neodymium drain bolt (MD-04, M16-P1.5)

 

*compatible with external differential fluid cooler.

Part #: 14510400
Price: 480.00
IMAGES:
Sci / Toy / Sub FR-S / 86 / BRZ 2012-16

6038e金沙 GReddy X KW Performance Coilovers

14016101
Car Make: Sci / Toy / Sub
Type: FR-S / 86 / BRZ
Size: 2012-16
Notes:

6038e金沙 Scion FR-S / Toyota 86 ZN6 (4U-GSE) or Subaru BRZ ZC6 (FA20)

Spring Rate: (Linear)
      Front: 6.0 K
      Rear: 7.0 K

Adjustment Range:
      Front:  20-50mm
      Rear:  20-50mm

6038e金沙 Adjustable Front Top Hat

 

  • Externally Adjustable Damping
  • Adjustable  Aluminum Spherical Bearing Upper Mount (F)
  • Low Profile Helper Spring Set-up
  • Hardened Chromed Piston Rod
  • Low Friction Twin-Tube Dampening
  • Compression Bumpstop with Intergrated Dust Boot
  • High Strength Race Spring
  • Corrosion-resistant Composite Spring Seats
  • Galvanized Strut with Continous Threads


6038e金沙 Made in Germany

6038e金沙 Includes all nceessary componets, adjustment tool and installation instructions

Part #: 14016101
Price:
1450.00
IMAGES:
Subaru BRZ 2013-16

Front Lip Spoiler - 

17060060
Car Make: Subaru
Type: BRZ
Size: 2013-16
Notes:

6038e金沙 - hard Urethane construction

6038e金沙 lowers 17mm

Instruction Manual

Part #: 17060060
Price:
260.00
IMAGES:
Scion FR-S 2013-16

6038e金沙 Front Lip Spoiler -

17010098
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

- hard Urethane construction

lowers 17mm

Instruction Manual

Part #: 17010098
Price:
260.00
IMAGES:
Toyota 86 2017-

Front Lip Spoiler

17010099
Car Make: Toyota
Type: 86
Size: 2017-
Notes:

"Kouki" 86

- hard Urethane construction

Instruction Manual

Part #: 17010099
Price:
260.00
IMAGES:
Scion FR-S 2013-16

Full Rocket Bunny 86/FRS/BRZ Wide-Body Aero Kit  Ver.3

17010270
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Scion FR-S / Subaru BRZ. (most parts will also fit 2017-20 models, except rear diffuser)
ZN6 (4U-GSE)

TRA Kyoto Designed

Rocket Bunny Wide-body Aero Kit - Version 3 without optional wings


Front Bumper - FRP -1pc.
Front lipGrill Mesh
Side Skirts - FRP -2pcs.
Rear Over-Fender set +90mm - FRP -4pcs.
Rear Under Diffuser +60mm - FRP -1pc.
Front Canards - FRP - 2pcs.
Side Canards - FRP - 4pcs.
6038e金沙 Rear Canards - FRP - 6pcs.

Optional wing sets (sold separately)
Rear "Duck-tail" wing - FRP - 1pc.
6038e金沙 Rear GT Wing set - FRP - 1pc.

Part #: 17010270
Price:
3795.00
IMAGES:
Scion FR-S 2013-16

Full Rocket Bunny 86/FRS/BRZ Wide-Body Aero Kit  Ver.2

17010225
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Scion FR-S / Subaru BRZ (most parts will also fit 2017-20 models, except rear diffuser)
ZN6 (4U-GSE)

6038e金沙 TRA Kyoto Designed

Rocket Bunny Wide-body Aero Kit - Version 2. 

- FRP  -1pc.
   , ,  
- FRP -2pcs.
+45mm - FRP -4pcs. 
+70mm - FRP -4pcs.
+60mm - FRP -1pc.
- FRP - 1pc.


   ** ()

See our FB for more details

 

DISCLAIMER:
This body kit replaces the front OEM turn signal lights with aftermarket DRL LED type lights which can be wired to operate as driving lights and/or turn signals. However these lights are not DOT or E approved as this kit was originally developed for sales in Japan. It maybe unlawful to tamper, remove or replace DOT or E approved items with non-approved lights on street driven motor vehicles. The included DRL / signal lights should only be installed and used for off-road, competition show purposes, not for public street or highway use. Please be sure to check with your local and federal laws before purchasing or installing. 

Part #: 17010225
Price:
3795.00
IMAGES:
Scion FR-S 2013-16

Full Rocket Bunny 86/FRS/BRZ Wide-Body Aero Kit  Ver. 3.5 - NEW

17010288
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Scion FR-S / Subaru BRZ. (most parts will also fit 2017-20 models, except rear diffuser)
ZN6 (4U-GSE)

TRA Kyoto Designed

Rocket Bunny Wide-body Aero Kit - Version 3.5 without optional wings


Front Bumper - FRP -1pc.
Front Splitter, support rods
Grill Mesh
Side Skirts - FRP -2pcs.
Front Over-Fender set +65mm - FRP -4pcs.
Rear Over-Fender set +90mm - FRP -4pcs.
Rear Under Diffuser +60mm - FRP -1pc.
Front Canards - FRP - 2pcs.
Side Canards - FRP - 4pcs.
6038e金沙 Rear Canards - FRP - 6pcs.

Optional wing sets (sold separately)
Rear "Duck-tail" wing - FRP - 1pc.
Rear GT Wing set - FRP - 1pc.

Part #: 17010288
Price:
4350.00
IMAGES:
Scion FR-S 2013-

Rocket Bunny 86 Aero, Ver.2 - Rear Duck Tail Wing (only) 

17010236
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
6038e金沙 ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Rear Duck Tail Wing  from the Version 2 Kit.
6038e金沙 Also compatiable with the Version 1 Aero kit (without the GT-Wing)



 

See our blog for more details

Part #: 17010236
Price:
525.00
IMAGES:
Scion FR-S 2013-

Rocket Bunny 86 Aero, Ver.2 - Dai Canard Option

DYCANARD
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

6038e金沙 Optional DAI. Exclusive Canard set(6 pieces) for Rocket Bunny Ver.2 kit for FR-S/ BRZ

Custom made canards for Dai Yoshihara’s Formula D race car is now available to all the Rocket Bunny Ver.2 kit owners.
TRA Kyoto Designed

6 piece /  Material: FRP

* to be used with Rocket Bunny Version 2 FR-S/BRZ wide-body aero kit, sold separately
 

Part #: DYCANARD
Price:
495.00
IMAGES:
Scion FR-S 2013-

Rocket Bunny 86 Aero, Ver.2 - Front Bumper (only) 

17010231
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
6038e金沙 ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Front Bumper  from the Version 2 Kit.
FRP -

  *Sold Seperately:

      V2 LED Lights - 17010230*
      V2 Grill Mesh - 17010239*
      V2 Front Splitter - 17010237*
      V2 Front Fenders - 17010234*


See our blog for more details

Part #: 17010231
Price:
865.00
IMAGES:
Scion FR-S 2013-16

Rocket Bunny FRS Aero, Ver.1 - Mr. Miura Edition Brake Ducts

66910210
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Optional Side Brake Duct Set for Rocket Bunny Ver.1 kit for FR-S OEM Front Bumper

Material: FRP

Part #: 66910210
Price:
260.00
IMAGES:
Scion FR-S 2013-

Rocket Bunny 86 Aero, Ver.2 - Front Splitter (only) 

17010237
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
6038e金沙 ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Front Splitter  from the Version 2 Kit.
Plastic -

  *Sold Seperately:

      V2 OMP Rods - 17010238*  - ($75.)
      V2 Front Bumper - 17010231"
      V2 LED Lights - 17010230*
      V2 Grill Mesh - 17010239* - ($65.)
      


See our blog for more details

Part #: 17010237
Price:
150.00
IMAGES:
Scion FR-S 2013-

Rocket Bunny 86 Aero, Ver.2 - Side Skirts (only) 

17010232
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Side Skirts  from the Version 2 Kit.
FRP -

  *Sold Seperately:

      V2 Front Fenders - 17010234*
      V2 Rear Fenders - 17010235*

See our blog for more details

Part #: 17010232
Price:
865.00
IMAGES:
Scion FR-S 2013-

Rocket Bunny 86 Aero, Ver.2 - Rear Under Diffuser (only) 

17010233
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Rear Under Diffuser  from the Version 2 Kit.
FRP - (trimming of the stock OEM rear bumper is required)

 

See our blog for more details

Part #: 17010233
Price:
560.00
IMAGES:
Scion FR-S 2013-

Rocket Bunny 86 Aero, Ver.2 - Front Fenders (only) 

17010234
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

6038e金沙 TRA Kyoto Designed

Front Fenders & Front covers for the Bumper  from the Version 2 Kit.
FRP -  (extensive trimming of the OEM fenders is required)

  *Sold Seperately:

      V2 Front Bumper - 17010231"
      V2 Side Skirts - 17010232*
      V2 Rear Fenders - 17010235*
   


See our blog for more details

Part #: 17010234
Price:
500.00
IMAGES:
Scion FR-S 2013-

Rocket Bunny 86 Aero, Ver.2 - Rear Fenders (only) 

17010235
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
6038e金沙 ZN6 (4U-GSE) / ZC6 (FA20)

6038e金沙 TRA Kyoto Designed

Rear Fenders & Rear trim for the Bumper  from the Version 2 Kit.
FRP -  (extensive trimming of the OEM fenders is required)

  *Sold Seperately:

      V2 Front Fenders - 17010234"
      V2 Side Skirts - 17010232*
   


See our blog for more details

Part #: 17010235
Price:
500.00
IMAGES:
Scion FR-S 2013-

Full GReddy X Rocket Bunny 86 Wide-Body Aero Kit, Ver.1  w/ GT Wing

17010224
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S 
ZN6 (4U-GSE)

TRA Kyoto Designed

Complete 19pcs. Kit
GReddy X Rocket Bunny Wide-body Aero Kit with GT Wing - Version 1.

1.  Front Lip Spoiler - FRP (FR-S / 86 bumper requried)  -1pc.
2.  Side Skirts - FRP -2pcs.
3.  Front Over-Fender set  +45mm - FRP -4pcs.
4.  Rear Over-Fender set  +70mm - FRP -4pcs.
5.  Rear Under Diffuser  +60mm - FRP -1pc.
6.  GT Rear Wing set  - FRP -7pcs. 

Part #: 17010224
Price:
4995.00
IMAGES:
Scion FR-S 2013-16

6038e金沙 Full GReddy X Rocket Bunny 86 Wide-Body Aero Kit, Ver.1

17010223
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Scion FR-S 
6038e金沙 ZN6 (4U-GSE)

TRA Kyoto Designed

GReddy X Rocket Bunny Wide-body Aero Kit  (12pcs.) 6038e金沙- Version 1. w/o GT Wing

Front Lip Spoiler - FRP (FR-S / 86 bumper requried)  -1pc.
Side Skirts - FRP -2pcs.
Front Over-Fender set  +45mm - FRP -4pcs.
Rear Over-Fender set  +70mm - FRP -4pcs.
Rear Under Diffuser  +60mm - FRP -1pc.

 - GT Rear Wing can be purchased seperately p/n 17010216 - FRP 
           
  

Part #: 17010223
Price:
2795.00
IMAGES:
Scion FR-S 2013-

6038e金沙 GReddy 86 Street Aero Kit

17010221
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S 
6038e金沙 ZN6 (4U-GSE)

6038e金沙 TRA Kyoto Designed

GReddy  Street Aero Kit  (non-widebody)  

Front Lip Spoiler - FRP
Side Skirts - FRP
6038e金沙 Rear Side Underspoilers - FRP

6038e金沙 Rear Wing sold seperately p/n 17010206

TBA

Part #: 17010221
Price: CALL
IMAGES:
Scion FR-S 2013-16

GReddy X Rocket Bunny 86 Aero, Ver.1 - GT Wing (only)

17010216
Car Make: Scion
Type: FR-S
Size: 2013-16
Notes:

Scion FR-S 
ZN6 (4U-GSE)

6038e金沙 TRA Kyoto Designed

6038e金沙 GReddy X Rocket Bunny Wide-body Aero Kit, Ver.1

GT Rear Wing only 
   1600x380mm GT Wing plane with uprights and trunk mounts.
        *(hold drilling required) 

             

Part #: 17010216
Price:
2600.00
IMAGES:
Scion FR-S 2013-

GReddy X Rocket Bunny 86 Aero, Ver.1 - Front Lip Spoiler (only)

17010211
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S 
ZN6 (4U-GSE)

6038e金沙 TRA Kyoto Designed

Front Lip Spoiler from the Version 1.
6038e金沙 GReddy X Rocket Bunny Wide-body Aero Kit 

Front Lip Spoiler - FRP (Scion FR-S / Toyota 86 bumper requried)  -1pc.
 - Extends vehicle length by 55mm
 - Installs on factory Scion FR-S Bumper (or Toyota 86)

Part #: 17010211
Price:
530.00
IMAGES:
Scion FR-S 2013-

GReddy X Rocket Bunny 86 Aero, Ver.1 - Side Skirts (only)

17010213
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
6038e金沙 ZN6 (4U-GSE) / ZC6 (FA20)

6038e金沙 TRA Kyoto Designed

Side Skirts  from the Version 1.
GReddy X Rocket Bunny Wide-body Aero Kit 


Side Skirt - FRP -2pcs.
 - requires some drilling for installation

Part #: 17010213
Price:
860.00
IMAGES:
Scion FR-S 2013-

GReddy X Rocket Bunny 86 Aero, Ver.1 - Front Over-Fenders (only)

17010212
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S 
ZN6 (4U-GSE) 

TRA Kyoto Designed

Front Over-Fender and Bumper Trim from the Version 1.
GReddy X Rocket Bunny Wide-body Aero Kit 


Front Over-Fender set +40mm - FRP -4pcs.
 - installs on factory front fender. 
 - fender trimming required
 - bumper trim pieces only designed for FR-S or 86 front bumper

Part #: 17010212
Price:
500.00
IMAGES:
Scion FR-S 2013-

GReddy X Rocket Bunny 86 Aero, Ver.1 - Rear Over-Fenders (only)

17010214
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Rear Over-Fender and Bumper Trim from the Version 1.
6038e金沙 GReddy X Rocket Bunny Wide-body Aero Kit 


Rear Over-Fender set +65mm - FRP -4pcs.
 - installs on factory fender. 
 - fender trimming required
 

Part #: 17010214
Price:
500.00
IMAGES:
Scion FR-S 2013-

GReddy X Rocket Bunny 86 Aero, Ver.1 - Rear Under Diffuser (only)

17010215
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Scion FR-S / Subaru BRZ
6038e金沙 ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Rear Under Diffuser  from the Version 1.
GReddy X Rocket Bunny Wide-body Aero Kit 


Rear Under Diffuser +60mm - FRP -1pc.
 - extends vehicle length by 60mm
 - trimming of factory rear bumper required
 

Part #: 17010215
Price:
560.00
IMAGES:
Scion FR-S 2013-

Engine Hood LIfter Kit

18510101
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

also fits Subaru BRZ

(ZN6) 4U-GSE / (ZC6) FA20

Carbon-Fiber Damper with ball and cop joints (all black finish)

Application Specific Hood and Fender mounts

Designed for OEM weight hoods.
(use with aftermarket hoods are not recommended)

6038e金沙 Set of 2 Carbon Dampers and Mounts. LH & RH

Part #: 18510101
Price:
205.00
IMAGES:
VIDEO:
view video
Scion FR-S 2013-

Magnetic Drain Plug

13901304
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Neodymium Oil Pan Drain Plug

6038e金沙 Also fits Subaru BRZ (FA20)

Magnetic tip

MD-04 (M16xP1.5) fits Scion FR-S, Subaru BRZ, & Toyota 86

6038e金沙 for more details, please see our

Part #: 13901304
Price:
18.00
IMAGES:
Scion FR-S 2013-

6038e金沙 Sports Oil Filter  OX-04

13901104
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

6038e金沙 GReddy Sports Oil Filter OX-04

6038e金沙 Also fits Subaru BRZ (FA20)

MD-04 (M20xP1.5, 68mm Dia., 65mm Tall) fits Scion FR-S, Subaru BRZ, & Toyota 86

 

(Vehicles using a GReddy Oil Cooler will use OX-01 Oil Filter )

Part #: 13901104
Price:
16.00
IMAGES:
Scion FR-S 2013-

Type N  High Pressure Radiator Cap(s)

1391100X
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

GReddy N-Type Radiator Cap(s)

6038e金沙    Also fits Subaru BRZ (FA20)

1.3kg/cm2 (127kpa)  pressure 

Cap Finish Options:

  13911001 - Black
  13911003 - Polished
  13911005 - Brushed

* Radiator Cap and Upper Water Temp Adapter sold separately

Part #: 1391100X
Price:
25.00
IMAGES:
Scion FR-S 2013-

6038e金沙 Radiator Breather Tank

12400908
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Also fits Subaru BRZ (FA20)

N-Type Cap, 8mm Hoses

recommend to use with GReddy Hose Adapter

Part #: 12400908
Price:
158.00
IMAGES:
Scion FR-S 2013-

6038e金沙 Radiator Hose Adapter

16401640
Car Make: Scion
Type: FR-S
Size: 2013-
Notes:

Also fits Subaru BRZ (FA20)

6038e金沙 40mm anodized Blue, billet aluminum hose adpter

 

6038e金沙 installs in upper radiator hose for gauge water temp sensor

or lower hose for use with GReddy Breather Tank

Part #: 16401640
Price:
35.00
IMAGES: